go green expo is here in los angeles!

perf_logoif you’re in the los angeles area this weekend be sure to check out the go green expo happening at the los angeles convention center. it is on saturday and sunday from 10:00 am to 6:00 pm. there will be lots of green goodies and services advertised there just waiting for your business. as much as i like to think i’m “in the know” about all things green, i admit i didn’t find out about this event until it was too late to get a booth (but have no fear, reside will be exhibiting at our first trade show next month, the home remodelling & decorating  & eco-expo show, also happening at the los angeles convention center).

you can also catch mariel hemingway on saturday discussing “how to green your life” and her new book along with other panels discussing ways to incorporate “green” into your daily life. i’ll be there on saturday with the family in tow, so if you see us, please stop us and say hi!

insulation, tis blow-in the wind

our LEED project, westbourne, is really starting to come together. we had the insulation installed last week and for the exterior walls and the roof/ceiling we used the blown in from greenfiber as discussed in a previous post. here are a couple of action shots;

step one is installing the mesh on the inside of all the exterior walls.  

step two is cutting small holes in the mesh and inserting the vacuum hose and blowing the insualtion in. it took about three days for the complete install. 

kind of like a vacuum hose in reverse.
kind of like a vacuum hose in reverse.
the second floor complete with exterior walls and ceiling
the second floor complete with exterior walls and ceiling
the hopper that the insulation is fed into.
the hopper that the insulation is fed into.

everyone hangs out in the kitchen

 it seems no matter how small your kitchen is or how hard you try and keep people out, when you have friends over, they always end up in the kitchen. it’s inevitable. i must admit, i’ve even tried to leave the kitchen a little dirty, maybe even leave a few dishes in the sink before having people over for the sole purpose of keeping them out of the kitchen ( it never works by the way, and i end up washing dishes with one hand and flipping  mushrooms in the other in front of an amused audience). so i decided to not only accomodate people in the westbourne kitchen, but really create a kitchen that will be sure to be the center of the party, that embraces the gathering and celebration of good food and great friends. from family gatherings to cocktail parties, this is one kitchen that will see a lot of smiling faces.
kitchen-plan1
floor plan

 

we created an open kitchen that features a large sliding window system by nanawall that will allow for great cocktail parties as the outside/inside line merge to become one. we’ll also be building a countertop on the outside side of the nanawall window system. the countertops will be caeserstone, a product made from crushed quartz and extremely durable. the drawing below is the floor plan of the kitchen (layout);

Elevation looking at cabinetry, sliding window system
elevation looking at cabinetry, sliding window system

 

the drawing to the right is an elevation (as if you were standing in the kitchen looking out) of the cabinetry and sliding window system. the windows will all slide to the left allowing a gracious 10′-0 opening;

 

  

elevation of cabinetry and 4'-0" range
elevation of cabinetry and 4'-0" wide range

 

the drawing to the right is an elevation looking at the 4′-0″ wide range and cabinetry. notice we’re not installing uppers along the back wall which we’ll keep a nice open feel in the kitchen (we have plenty of storage).

 

 

elevation showing refrigerator and upper cabinets
elevation showing refrigerator and upper cabinets

 

the drawing to the right shows the upper cabinets and refrigerator wall elevation. the cabinets will be made from FSC, forest stewardship council, rift cut white oak. the cabinet construction will be 100% formaldehyde free.

california going greener

david22california has long been a trend setter  for the rest of the country and many states look to california for guidance on setting up many of their own rules and regulations. here is an article, from the associated press,  that i hope grabs the attention of other states’ legislators,  california’s committment to go a deeper shade of green. one particular point that caught my eye was this one:

“But there will also be costs: Cars could become more expensive, and Californians can expect higher electric rates as utilities increase their use of renewable energy. Homes built with energy-efficient materials could also prove more costly, as could gasoline reformulated to release less carbon dioxide.”

i thinks it’s a great idea the utility companies will be increasing their use of renewable energy, but it sounds like this may be an increase in cost to the consumer. one way to create a win win situation is for the homeowners to make sure their existing homes are as energy efficient as possible (window leaks are sealed, weather stripping around all exterior doors is installed, dual pane windows are installed, to name a few).

for homeowners considering a major remodel or new construction, it’s even more important (as well as an exciting opportunity) to consider designing and building the most energy efficient home possible, including properly sealing the exterior envelope with foam and insulation, using energy efficient windows with low e and argon filled glass, planning for open spaces to allow for natural ventilation, and planning for overhangs that keep the sun out in the summer but let the sun inside in the winter. the above items, when properly designed into the project, will add little overall cost (assuming a major remodel), but will go a long way in helping your home become more energy efficient.

insulation, hoo, what is it good for?

let me start by playing catch-up on the westbourne project. it is an existing two story home and is currently undergoing an extensive remodel. the interior was completely gutted down to the studs and the owners graciously donated much of the interior to the reuse people.

we provided the architectural design services and are also providing construction services as well, which makes for a cohesive “green” project for everyone involved.

we began construction in the middle of july. I originally designed the home to be “green” but I wasn’t aware we could qualify for the LEED for homes program because I thought only new homes could qualify. however, because of the extensive renovation and the green steps I had already implemented into the design, the project qualified and we are now participating in the program.

we’ve reframed much of the interior and completely opened up the ground floor to include a much larger kitchen and dining area that opens to the backyard via a 12′-0 wide sliding door system that allows the dining area to flow outside.

we’ve also installed all new doors and windows and a “cool roof” that will aid in limiting heat gain from the sun’s rays. we’ve spent the last month patching and repairing the existing stucco as well. tomorrow we will be having most of the structure sprayed with a natural chemical called borate that termites really don’t like, so they won’t be coming around for dinner anymore.

we are now getting ready to install the insulation, the topic of my post. it’s amazing to me that the most older homes circa 1950, in the los angeles area never had insulation installed in the walls. the old walls  typically consist of a 1″ layer of interior plaster, 3 1/2 inches of air space and another 1″ of stucco material. that’s not much between you and mother nature when you go to sleep at night, especially if your bed is up against an exterior wall.

in the 60’s they began putting insulation in the walls in the los angeles area and the choice has always been a batt fiberglass insulation, the pink itchy scratchy stuff that you see in home depot in giant rolls, the ones with the pin panther on it. they still use it today but there are better alternatives that will do a much better job at sealing the exterior envelope (which should be the goal of any insulation job).

for the exterior walls on our project, we will first seal and caulk around all the doors and windows and fill all holes and gaps, any place that the outdoors could get in and vica versa. we then need to install a mesh netting on the interior of all the exterior walls. then we will use  a loose fill made of 85% recycled newspaper (it’s treated to be fire retardant) made by greenfiber and blow it in the walls. this process will completely seal the exterior envelope to leed standards.

for the interior walls, we have been considering a formaldehyde free fiberglass batt insulation made by johns manville and the now hip and trendy, recycled blue jean or cotton insulation made by bonded logic. we decided yesterday to use the batt insulation manufactured by johns manville, a company known for its formaldehyde free insulation products because it is a less expensive option. the cotton insulation is a great product but is difficult to work with and costs 2-3 times as much as the batt insulation.

properly insulating your home is one of the most important things you can do when remodelling your home. make sure your architect and contractor are aware of the different insulation types and conscious of your budget. all too aften, architects aren’t as informed as they should be about insulation and  builders just “do it the way we’ve always done it”. it may be up to you to educate your team.

welcome from david doucette, aia leed ap, founder of reside architecture, inc.

welcome to my blog for the office i founded, reside architecture, inc. this is new territory for me but i’m hoping to share thoughts on architecture, residential design & construction, green building principles, green living, and share updates on our own projects as well.

one of our more exciting projects at this time is an existing two story home in west hollywood, california that we are performing a major remodel on. we are providing design and construction services and are currently in the middle of construction. the most interesting aspect of the project is that we designed the home to qualify for the LEED for homes rating program, a new national green building program and the most comprehensive green building program in the country click here for more info.

another project i am very excited about is the complete restoration of a 1956 airstream travel trailer. this particular model has the beautiful name “flying cloud”. it is a work in progress and i’ll be writing more about this project as well.